sanyo CBP2576 ED0 Repair Tips
Search: CBP2576 ED0 sanyo
Results 4
Results 4
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Sanyo | CBP2576 ED0 | No sound | Carry out "start NVM" proc as described in manual | ||
Sanyo | CBP2576 ED0 | No E-W correction | ICP R756 (N20) o/c | ||
Sanyo | CBP2576 ED0 | Dead - whistle only - LOPTr 2SD1556 leaky | ,Overheats when replaced with int narrow pic, replaced C750 47µ 50v & C705 2µ2 50v for hi esr & check for dry joints in LOP section | ||
Sanyo | CBP2576 ED0 | Burning smell then dead | Burn up on pcb at line scan connector K-FF |